Review for dovpo vv box mod topside squonk basium nickel 230w dual
The vapeciga vv box mod is the latest in a little-known Dovpo. I have a ton of their product, but as they do VV mod M a few years, and dead and double work mods Squonk superstructures were also very good, so overall a solid company formed my limited experience of the end.
I also recently revised its sheath kit D-salt and the presentation of new BLOTTO soon too. M II is a double VV VV mod 18650 (variable voltage) measured at 280 watts to adjust the pot (potentiometer) on the front panel. It is available in 3 colors all with a black frame and panel design which only differs Skull and Roses, Dragon Samurai, and Hannya. Look around online, I do not see available in China and around 27-35 dollars.
Construction of a zinc alloy + PC
Output voltage: 1-8V
maximum power of 280 Watt
Voltage: 6.4V 8.4V-
Resistance Range: 0.08-3.5ohm
protection against overheating
Additional hours of vaping warning
Protection against reverse battery
Powered by two 18650 batteries (batteries sold separately)
LED displays the battery life
New aesthetic look stylish and colorful designs
Threaded connector 510
Port of load C-USB
Included in the box:
M VV Mod II Box
Type C USB Cable
first impressions and characteristics
When Mod, I am very surprised, because there is a ton of mods battery made today doubles again and even rarer is a topside squonk mod show new. The latter was the murderer benecig I saw a year ago and since then I think the only other set is IJOY.
No mod created this style often, so I’m happy to see that. I also like the original VV mod M is always best to be found in IMO General VV mod and super cheap around $ 30 and can still price, so I would like to know if this mod will increase. I personally do not mind the work of a good group, but that’s just my opinion. I liked the design of the best original plan. house also has a metal body and soft layers to your new temporary PC (polycarbonate) to light. The other major difference is the battery meter and has a USB port C in general, but I was like illustration to start.
Performance (graphics and spreadsheets in a photo album)
Now let’s get into some of the data. I ran the normal tests. I use a battery test VTC5A Sony. The tensile tests performed at 0.1, 0.17, 0.2 and 0.63 ohms. Note that the boat without digital screen, make every effort to walk 2, 3 and 4 are the same each time, but maybe a little variety. 1 and 5 parameters that are easy for all one-way streets. It was created to provide a basic guide of what to expect at each setting and test the maximum and minimum power is important in this mods. With the construction of 0.1 ohms and 143 watts reaches 38 amperes I max. Today amplifier dual battery half mod. 3787 volts is the maximum resistance (limited by ampere) and the minimum I get is .736V 5 Watt and so much tension and range of watts. Built with 0.17 watts maximum 218 280W short so if you are registered, which is similar to the original problem. The voltage range is from 0.736 to 6.101 and about 3-219 watts. 0.2 ohms and 213 watts construction Imax voltage range is from 0.842 to 6.522 and a range of 4-213 watts so it is good again. 0,63 ohms building has a range of 0842 to 7994 voltage and power range of 1 to 101. Very good again.They make a list of all specifications as well. They list 280 watts maximum short, but many have fallen into the trap 219. basium squonk mod click in amp max 45 which in turn fell short range and 40 would be fairer, but both limit watt amplifier and a good limit battery current standard for dual mod. 38 amps and 219 watts.
They register 1-8V output voltage range is the most I’ve seen in one of those mass-produced modification of VV and a big reason why I love them and they are a great record and to the extent that the various tests from 0.736 to 7994.
Overall, I think the performance of the model is very good. Very similar maybe even the same chip and same with the original. It has a wide voltage range of my love. Compared with the latter VV MOD II tested is killer dovpo benecig the low power M VV II and AMPS max, but recommend realistic, I vaping over 150 watts are also in the double model is far celui- 18,650 and 220, and most people vaping not too and the same applies high limit amplifier were more than adequate and in line with most mods, even if it is slightly shorter than the killer. It has a lot better voltage range when the murderer is why I love this mods and the best results. The only complaint about this specification is redundant.
TLDR overview of energy efficiency
the performance is very good mod. Good range of VV mod (.736V to 7.994V), Max 219 watts, 38 amps max two good figures for the model 18650 double, but both were lower than the specified type.
Note the use of otherThis model uses a standard 5 clicks to turn on and off. This is a dovpo nickel 230w mod get code so no menu or mode. It’s just the shutter button and the tray to adjust the tension.
Only needle pot appeared to reduce production hours and the right to increase production. nice and easy to assemble large pot. No screen or another button appears and there is no TC mode. The model itself is built solid squeaker PC keyless and light body. The battery cover is the side panel of the standard door, which is owned by the magnet and adjustment without play. battery configuration easily in the sled as well and is easy to get in and out and do not need to wrap destruction.
paint looks good and not scratched, and saw the door to me, even at the bottom. It is a black body PC with a matte finish. The only color in the panel. I have a sound skull and roses are works of art with a skull in the center and around the roses. It seems that is not my personal style. Nice and simple shutter button displacement concave circle. It works well and never had anything or blocked, which is as it should be. 510-pin gave me a problem and each spray is used a great work smoothly. Mod handle atomizer 25 mm. More out. 510 slightly shifted backward, then forward as a whole, but forward and backwards on an inclined platform. Mod also the brand itself does not exist.LED on the battery meter vapeciga topside dual do so. Green indicates the battery is 7.6V or more, which means 7V-7.6V 6.9V or less yellow and red means. Cells stored at 6.4V cut soft. good job there in its entirety, but in step 4 would be good.
LED is activated only when cooking. I can not find the specified costs and do not recommend to recharge your batteries in a mod if you can avoid, but the goal of putting the information to a test meter charge level with USB online and get the load factor 2A 1 78 so the maximum load greater weight.
mod build quality
wide voltage range
amps and watts good limit limit
simple, easy to use
The battery is easy to obtain, without damaging the packaging
The keys are well api
Buenos pin 510
LEDs act as the battery indicator
Pot is easy to adjust
Mod handle 25 mm without false Atty
Mod mod called when VEM VEM
Lack of color options (black only with panel design 3 busy, no matter I)
Watt redundant and limits Amp
The battery indicator may use a step-by-4
So with all that said, I recommend this mod or not? I do not care whether or not hard, but it’s pretty easy to lean on him heavy. Its price is very reasonable as low as $ 27 and it works. Personally, I prefer the original is better because it looks and design, but the same performance between the two so it was just a matter of preference. If you are in the market for a VV mod and as we see, is an excellent purchase. I added to my CV RECs link below.
It was to keep Anthony fried only honest, I hope you can all say the same thing and I will take the next revision.
You can buy here:dovpo box mod https://www.vapeciga.com/collections/dovpo